E-mail : [email protected] | Thailand Sales Office : (+66) 2744-1632

THERMAL MANAGEMENT

TOP PANEL BRUSH STRIP PLATE

Depending on your overall thermal management set up, you may need top panel ventilation. The vented top panel plate acts as passive ventilation allowing heat to be released through the top of the rack. A frequently over looked component in air flow management, blank or filler panels allow you to close up unused U space. This forces incoming cool air to pass through active components with pull fans already installed in your cabinet. It also blocks the hot air from the rear side to mix up the cool air at the front side. Base filler panel kits helps to prevent air leakage, dust and vermin intrusion.

Disclaimer. All product information and catalogs sheets are updates from time to time and actual product may vary from what is shown.

  • FEATURES
  • STANDARDS & MATERIALS
  • DOWNLOAD

Top panel brush strip plates are used for convenient cable entry through the top of the rack. Allows cables to pass, but blocks air and contaminants.

  • Prevent air leakage between cable and cutout
  • Block contaminants
  • RoHS compliant
  • Conforms to ASTM D610-01 and ASTM B117 (500 hours salt spray test)
  • High grade cold rolled steel 0.9 mm thickness.
  • Powder coat finish preceded by 5 stage iron phosphate pre treatment.
  • Standard color is low gloss black. Special colors upon request.

Download

THERMAL MANAGEMENT

FAN TRAY FOR ARION RACK

Depending on your overall thermal management set up, you may need top panel ventilation. The vented top panel plate acts as passive ventilation allowing heat to be released through the top of the rack. A frequently over looked component in air flow management, blank or filler panels allow you to close up unused U space. This forces incoming cool air to pass through active components with pull fans already installed in your cabinet. It also blocks the hot air from the rear side to mix up the cool air at the front side. Base filler panel kits helps to prevent air leakage, dust and vermin intrusion.

Disclaimer. All product information and catalogs sheets are updates from time to time and actual product may vary from what is shown.

  • FEATURES
  • STANDARDS & MATERIALS
  • DOWNLOAD

To reduce hot spots and for supplemental air flow, our top panel mounted three way fan trays can help. Fan trays available in 115 or 220 volts.

  • Installs quickly on top panel
  • 3 high efficiency ball bearing fans
  • 243 CFM or 6.9 cu.m./ min. air flow
  • Available in 115 - 220 VAC
  • Various AC power cord plugs available
  • RoHS compliant
  • High grade cold rolled steel 0.9 mm thickness.
  • Powder coat finish preceded by 5 stage iron phosphate pre treatment.
  • Standard color is low gloss black.

THERMAL MANAGEMENT

CABLE ENTRY BRUSH STRIP

Depending on your overall thermal management set up, you may need top panel ventilation. The vented top panel plate acts as passive ventilation allowing heat to be released through the top of the rack. A frequently over looked component in air flow management, blank or filler panels allow you to close up unused U space. This forces incoming cool air to pass through active components with pull fans already installed in your cabinet. It also blocks the hot air from the rear side to mix up the cool air at the front side. Base filler panel kits helps to prevent air leakage, dust and vermin intrusion.

Disclaimer. All product information and catalogs sheets are updates from time to time and actual product may vary from what is shown.

  • FEATURES
  • STANDARDS & MATERIALS
  • DOWNLOAD

The Cable entry with brush strips allows cables to pass, but blocks air and contaminants. These are fitted in the any top panels, or in the 800 wide side channel covers.

  • Prevent air leakage between cable and cutout
  • Block contaminants
  • RoHS compliant
  • Conforms to ASTM D610-01 and ASTM B117 (500 hours salt spray test)
  • High grade cold rolled steel 0.9 mm thickness.
  • Powder coat finish preceded by 5 stage iron phosphate pre treatment.
  • Standard color is low gloss black. Special colors upon request.

Download

THERMAL MANAGEMENT

19" FILLER PANELS

Depending on your overall thermal management set up, you may need top panel ventilation. The vented top panel plate acts as passive ventilation allowing heat to be released through the top of the rack. A frequently over looked component in air flow management, blank or filler panels allow you to close up unused U space. This forces incoming cool air to pass through active components with pull fans already installed in your cabinet. It also blocks the hot air from the rear side to mix up the cool air at the front side. Base filler panel kits helps to prevent air leakage, dust and vermin intrusion.

Disclaimer. All product information and catalogs sheets are updates from time to time and actual product may vary from what is shown.

  • FEATURES
  • STANDARDS & MATERIALS
  • DOWNLOAD

A frequently over looked component in air flow management, blank or filler panels allow you to close up unused U space. This forces incoming cool air to pass through active components with pull fans already installed in your cabinet. It also blocks the hot air from the rear side to mix up the cool air at the front side.

  • Easy to install to the front of the 19" rails
  • High grade cold rolled steel, thickness 1.2 mm.
  • Tough scratch resistant powder coat finish.

Available in 1U through 5U

  • High grade cold rolled steel 1.2 mm thickness.
  • Powder coat finish preceded by 5 stage iron phosphate pre treatment.
  • Standard color is low gloss black. Special colors upon request.

THERMAL MANAGEMENT

19" TOOL LESS FILLER PANELS

Depending on your overall thermal management set up, you may need top panel ventilation. The vented top panel plate acts as passive ventilation allowing heat to be released through the top of the rack. A frequently over looked component in air flow management, blank or filler panels allow you to close up unused U space. This forces incoming cool air to pass through active components with pull fans already installed in your cabinet. It also blocks the hot air from the rear side to mix up the cool air at the front side. Base filler panel kits helps to prevent air leakage, dust and vermin intrusion.

Disclaimer. All product information and catalogs sheets are updates from time to time and actual product may vary from what is shown.

  • FEATURES
  • STANDARDS & MATERIALS
  • DOWNLOAD
  • Gasket in place seals panel against 19” vertical rail, preventing unwanted air leakage.
  • Low profile front surface that does not interfere with vertical airflow.
  • Available in 1U to 5U
  • RoHS compliant
  • Conforms to ASTM D610-01 and ASTM B117 (500 hours salt spray test)
  • High grade cold rolled steel 1.2 mm thickness.
  • Powder coat finish preceded by 5 stage iron phosphate pre treatment.
  • Standard color is low gloss black. Special colors upon request.

Download

THERMAL MANAGEMENT

BASE FILLER PANEL KIT

Depending on your overall thermal management set up, you may need top panel ventilation. The vented top panel plate acts as passive ventilation allowing heat to be released through the top of the rack. A frequently over looked component in air flow management, blank or filler panels allow you to close up unused U space. This forces incoming cool air to pass through active components with pull fans already installed in your cabinet. It also blocks the hot air from the rear side to mix up the cool air at the front side. Base filler panel kits helps to prevent air leakage, dust and vermin intrusion.

Disclaimer. All product information and catalogs sheets are updates from time to time and actual product may vary from what is shown.

  • FEATURES
  • STANDARDS & MATERIALS
  • DOWNLOAD

Base filler panel kits helps to prevent air leakage, dust and vermin intrusion.

  • Adjustable Cable entry cover plate
  • Decrease air leakage
  • Prevent dust and vermin intrusion
  • RoHS compliant
  • Conforms to ASTM D610-01 and ASTM B117 (500 hours salt spray test)
  • High grade cold rolled steel 0.9 mm thickness.
  • Powder coat finish preceded by 5 stage iron phosphate pre treatment.
  • Standard color is low gloss black.

About Us

Cheval is a global leader in the design, testing and manufacturing of 19" cabinets and related ICT (Information Communications Technology) products.

Read More

Contact Us

Address

145 Bangplee Industrial Estate
Soi 4 Moo 17 Junction 5/1 Bangsoutong
Samutprakarn Thailand 10570

Call Us

+66 2315 1504 - 5

Email Address

[email protected]

Copyright 2015 © Cheval Electronic Enclosure Co., Ltd. All rights Reserved.

Products

services

download

contact